Program

May 12

  • 17:00 Early congress registration
  • 18:00 Get-together

May 13

May 14

  • 8:30 Technical Sessions
  • 18:00 Evening Event: Dinner in Ratskeller, Aachen / Presentation Hans Berns-Award

May 15

May 16 - Plant visits:

  • Tour RWTH University: Institute for Material Application un Mechanical Eningeering (IWM) and Fraunhofer Institute for Laser Techology (ILT) in Aachen
  • Tour E-Mobility: Visit of the e.Go production factory in Aachen
  • Tour DEW: Deutsche Edelstahlwerke plant in Krefeld
  • Tour Ipsen: Ipsen International GmbH plant in Kleve  

Technical Sessions

Room A

Additive Manufacturing 1 - Hot Work Steel

11:00
Thermal fatigue and soldering resistance of additively manufactured hot work tool steels
Mikael ÅsbergKarlstad University
  • Pavel Krakhmalev, Karlstad University
  • Christos Oikonomou, Uddeholms AB
  • Henrik Andersson, Uddeholms AB
11:25
Characterization of microstructure and mechanical properties of high strength 5% Cr martensitic hot work tool steel manufactured by Selective Laser Melting
Jochen GiedenbacherFH OÖ Forschungs- und Entwicklungs GmbH
  • Christof Sommitsch, Institute of Materials Science, Joining and Forming, Graz University of Technology
  • Miloslav Ognianov, voestalpine BÖHLER Edelstahl GmbH & Co KG
  • Aziz Huskic, University of Applied Sciences Upper Austria
11:50
Corrosion resistant maraging steel for AM-produced plastic mold inserts
Christoph Turkvoestalpine BÖHLER Edelstahl Gmbh & Co KG
  • Horst Zunko, voestalpine Böhler Edelstahl GmbH & Co KG
  • Christin Aumayr, voestalpine Böhler Edelstahl GmbH & Co KG
12:15
A complete solution in metal AM for tooling applications – a case study on plastic injection moulding
Christos OikonomouUddeholms AB
  • Johnny Sjöström, Uddeholms AB
  • Seshendra Karamchedu, Uddeholms AB

Steel Design 2 - Hot Work Steel

14:00
Characterization of a modified hot-working steel with increased wear resistance
Serdal AcarLeibniz Universität Hannover
  • Gregory Gerstein, LUH Hannover Institut für Werkstoffkunde
  • Sebastian Herbst, LUH Hannover Institut für Werkstoffkunde
  • Uwe Lorenz, LUH Hannover Institut für Umformtechnik und Umformmaschinen
  • Irfan Yousaf Malik, LUH Hannover Institut für Umformtechnik und Umformmaschinen
  • Kai Brunotte, LUH Hannover Institut für Umformtechnik und Umformmaschinen
14:25
Development of an intelligent hot-working steel to increase the tool wear resistance
Uwe LorenzLeibniz Universität Hannover
  • Bernd-Arno Behrens, Institute of Forming Technology and Machines
  • Serdal Acar, Institute of Materials Science
  • Gregory Gerstein, Institute of Materials Science
  • Florian Nürnberger , Institute of Materials Science
  • Jan Puppa, Institute of Forming Technology and Machines
14:50
New filler material for repair of high-performance steel tools by laser cladding
Josephine ZeisigLeibniz-Institut für Festkörper- und Werkstoffforschung Dresden
  • Alexander Fröhlich, Chemnitz University of Technology, Institute for Machine Tools and Production Processes, Professorship for Forming and Joining
  • Julia Hufenbach, Leibniz Institute for Solid State and Materials Research Dresden, Institute for Complex Materials, Department for Alloy Design and Processing
  • Nicola Schädlich, Leibniz Institute for Solid State and Materials Research Dresden, Institute for Complex Materials, Department for Alloy Design and Processing
  • Verena Kräusel, Chemnitz University of Technology, Institute for Machine Tools and Production Processes, Professorship for Forming and Joining
  • Uta Kühn, Leibniz Institute for Solid State and Materials Research Dresden, Institute for Complex Materials, Department for Alloy Design and Processing
15:15
A new precipitation hardening steel to improve the lifetime of close die forging tools
Johannes FuchsBGH Edelstahl Siegen GmbH
  • Frank Hippenstiel, BGH Edelstahl Siegen GmbH

Steel Design 3

16:15
Effect of V on the phase amounts and the composition of MC carbides in Indefinite Chill alloys
Armin PaarEisenwerk Sulzau-Werfen, R. & E. Weinberger AG
  • Reinhold Schneider, FH-OÖ F&E GmbH
  • Christof Sommitsch, Graz University of Technology / Institute of Materials Science, Joining and Forming
  • Michael Aigner, Eisenwerk Sulzau-Werfen, R. & E. Weinberger AG
  • Thomas Trickl, Eisenwerk Sulzau-Werfen, R. & E. Weinberger AG
16:40
A NEW STEEL FOR PLASTIC MOULDS COMBINING CORROSION RESISTANCE, HIGH HARDNESS, HIGH DUCTILITY AND VERY GOOD POLISHABILITY
Magnus TidestenUddeholms AB
  • Anna Medvedeva, Uddeholms AB
  • Magnus Brännbacka, Uddeholms AB
  • Henrik Nöbauer, Uddeholms AB
  • Seshendra Karamchedu, Uddeholms AB
17:05
Influence of microsegregations on local phase stabilities in martensitic stainless cast steel
Frederic van gen HassendBergische Universität Wuppertal
  • Sebastian Weber, Bergische Universität Wuppertal
17:30
Optimization of TiC Hard Particles Morphology in Metal Matrix Composites by Niobium Addition
Andreas MohrDeutsche Edelstahlwerke Specialty Steel GmbH & Co. KG
  • Werner Theisen, Ruhr-Universität Bochum
  • Arne Röttger, Ruhr-Universität Bochum
  • Horst Hill, Deutsche Edelstahlwerke Specialty Steel GmbH & Co. KG

Room B

Steel Design 1- Cold Work Steel and HSS

11:00
A Computational Approach to the Microstructural Design of High-Speed Steels
Gero EgelsRuhr-Universität Bochum
  • Werner Theisen, Lehrstuhl Werkstofftechnik, Ruhr-Universität Bochum
  • Sebastian Weber, Lehrstuhl für neue Fertigungstechnologien und Werkstoffe, Bergische Universität Wuppertal
  • Nils Wulbieter, Lehrstuhl Werkstofftechnik, Ruhr-Universität Bochum
11:25
Possibilities for Niobium Application in Tool Steels
Rafael MesquitaCBMM Consultant
11:50
Novel high-performance steels for the development of cast tools
Nicola SchädlichLeibniz-Institut für Festkörper- und Werkstoffforschung
  • Uta Kühn, Leibniz-Institut für Festkörper- und Werkstoffforschung
  • Kai-Uwe Baumgart, Leibniz-Institut für Festkörper- und Werkstoffforschung
  • Josephine Zeisig, Leibniz-Institut für Festkörper- und Werkstoffforschung
  • Julia Kristin Hufenbach, Leibniz-Institut für Festkörper- und Werkstoffforschung
12:15
Effects of alloying elements in hardness modification during heat treatment of high speed steels
Ana BragaPolytechnic School of the University of Sao Paulo
  • Mario Boccalini Jr., Institute for Technological Research
  • Felipe Carvalho, Institute for Technological Research
  • Roberto Andrade, Institute for Technological Research

Additive Manufacturing 2 - Cold Work Steel and HSS

14:00
Additive Manufacturing of a cold work steel using Electron Beam Melting
Carlos BoteroMid Sweden University
  • Mikael Bäckström, Mid Sweden University
  • Lars-Erik Rännar, Mid Sweden University
  • Stefan Roos, Mid Sweden University
  • Andrey Koptyug, Mid Sweden University
  • Kenneth Åsvik, Uddeholms AB
  • Aydin Selte, Uddeholms AB
  • Markus Ramsperger, Arcam AB
  • Carlos Botero, Mid Sweden University
14:25
Processing of high carbon steels by Selective Electron Beam Melting (SEBM)”
Marie JurischFraunhofer-Institut für Fertigungstechnik und Angewandte Materialforschung
  • Thomas Wenz, Barradas Schweißtechnik GmbH
  • Silvia Vock, Fraunhofer IFAM
  • Bernd Kieback, Institute of Material Science, Technische Universität Dresden
  • Burghardt Klöden, Fraunhofer IFAM
  • Alexander Kirchner, Fraunhofer IFAM
  • Thomas Weißgärber, Fraunhofer IFAM
14:50
Processing of X65MoCrWV3-2 cold work tool steel by Selective Laser Melting
Johannes BoesRuhr-Universität Bochum
  • Arne Röttger, Ruhr-Universität Bochum, Lehrstuhl Werkstofftechnik
  • Werner Theisen, Ruhr-Universität Bochum, Lehrstuhl Werkstofftechnik
15:15
Mechanical Properties of High Speed Steel AISI M50 Produced by Laser Powder Bed Fusion
Johannes KunzInstitute of Applied Powder Metallurgy and Ceramics at RWTH Aachen e. V.
  • Christoph Broeckmann, Institute of Applied Powder Metallurgy and Ceramics at RWTH Aachen e.V. (IAPK)
  • Johannes Henrich Schleifenbaum, Fraunhofer Institute of Laser Technology (ILT) / RWTH Aachen University- Digital Additive Production (DAP)
  • Jasmin Saewe, Fraunhofer Institute of Laser Technology ILT, Aachen
  • Anke Kaletsch, Institute of Applied Powder Metallurgy and Ceramics at RWTH Aachen e.V. (IAPK)
  • Simone Herzog, Institute of Applied Powder Metallurgy and Ceramics at RWTH Aachen e.V. (IAPK)

Additive Manufacturing 3 - Hard Materials

16:15
Material and process development for additive manufacturing of cemented carbide tool shafts
Tim SchubertHochschule Aalen
  • Gerhard Schneider, Aalen University - Materials Research Institute
  • Timo Bernthaler, Aalen University - Materials Research Institute
  • Dirk Sellmer, MAPAL Dr. Kress KG
  • Markus Merkel, Aalen University - Institute for Virtual Product Development
  • Harald Riegel, Aalen University - Laser Application Center
  • Thomas Rieger, Aalen University - Materials Research Institute
16:40
Additive Manufacturing of Hardmetal Based Tools
Christian BergerFraunhofer-Institut für Keramische Technologien und Systeme
  • Johannes Pötschke, Fraunhofer IKTS
  • Tassilo Moritz, Fraunhofer IKTS
17:05
Additive Manufacturing of Metal Matrix Composites
Philipp KlugeDeutsche Edelstahlwerke Specialty Steel GmbH & Co. KG
  • Andreas Mohr, Deutsche Edelstahlwerke Specialty Steel GmbH & Co. KG
  • Horst Hill, Deutsche Edelstahlwerke Specialty Steel GmbH & Co. KG
  • Marie Jurisch, Fraunhofer IFAM Dresden
17:30
Laser based Additive Manufacturing of WC-Co with High Temperature Powder Bed Pre-Heating
Sofia FriesRheinisch-Westfälische Technische Hochschule Aachen
  • Markus Benjamin Wilms, Fraunhofer Institute for Laser Technology (ILT)
  • Martin Seimann, , Laboratory for Machine Tools and Production Engineering (WZL)
  • Andreas Weisheit, Fraunhofer Institute for Laser Technology (ILT)
  • Sofia Fries, Institute for Materials Applications in Mechanical Engineering
  • Anke Kaletsch, Institute for Materials Applications in Mechanical Engineering
  • Thomas Bergs, Laboratory for Machine Tools and Production Engineering (WZL)
  • Christoph Broeckmann, Institute for Materials Applications in Mechanical Engineering

Room A

Properties 1 - Hot Work Steel

08:30
Heat checking patterns and their relation with oxidation on a tool steel containing second-phase particles
Ana BragaPolytechnic School of the University of Sao Paulo
  • Luiz Lima, Surface Phenomena Laboratory, University of Sao Paulo
  • Roberto Souza, Surface Phenomena Laboratory, University of Sao Paulo
  • Mario Boccalini Jr., Institute for Technological Research
08:55
The most important material properties to resist thermal fatigue in hot work tool steel used in high pressure die casting
Anders ThuvanderUddeholms AB
  • Anna Medvedeva, Uddeholms AB
09:20
Alloy modification of classical CrMoV tool steels for special applications
Frank HippenstielBGH Edelstahl Siegen GmbH
  • Johannes Fuchs, BGH Edelstahl Siegen GmbH
09:45
The influence of the lath morphology on the fracture toughness of AISI H11 tool steel austempered below MS
Jian FengHochschule Heilbronn
  • Marc Wettlaufer, Centre of Materials Engineering, Heilbronn University

Properties 2 - Hot Work Steel

10:45
Properties and service life of the hot work tool steel Thermodur E 40 K Superclean for die casting applications
Markus GürcanDeutsche Edelstahlwerke Specialty Steel GmbH & Co. KG
  • Philipp Niederhofer, Deutsche Edelstahlwerke Specialty Steel GmbH & Co. KG
  • Markus Gürcan, Deutsche Edelstahlwerke Specialty Steel GmbH & Co. KG
11:10
Properties of tool steels for application in hot stamping
Philipp NiederhoferDeutsche Edelstahlwerke Specialty Steel GmbH & Co. KG
  • Kathrin Eger, Deutsche Edelstahlwerke Specialty Steel GmbH & Co. KG
  • Patrik Schwingenschlögl, Institute of Manufacturing Technology, Friedrich-Alexander-Universität Erlangen-Nürnberg (FAU)
  • Marion Merklein, Institute of Manufacturing Technology, Friedrich-Alexander-Universität Erlangen-Nürnberg (FAU)
11:35
Manufacturing of Container and Stem Forgings for the Extrusion Industry - Materials and Properties
Günter Zeilervoestalpine BÖHLER Edelstahl GmbH & Co KG
  • Volker Wieser, voestalpine Böhler Edelstahl GmbH & Co KG
12:00
Quench Embrittlement in Hot Work Tool Steels
Rafael MesquitaCBMM Consultant
  • Reinhold Schneider, Upper Austria University of Applied Science
  • Renato Logiudice, University Nove de Julho
  • João Henrique Storopoli, University Nove de Julho

Properties 3 - Hot Work Steel

13:30
Life time enhancement of forging dies with tailored diffusion treatments
Hanno PaschkeFraunhofer-Institut für Schicht- und Oberflächentechnik
  • Martin Weber, Fraunhofer Institute for Surface Engineering and Thin Films
  • Markus Mejauschek, Fraunhofer Institute for Surface Engineering and Thin Films
  • Dominik Lenz, Institute for Tool Research and Materials
  • Kai Brunotte, Institute of Forming Technology and Machines
  • Martin Siegmund, Institute of Forming Technology and Machines
  • Lenny Lippold, Institute of Forming Technology and Machines
13:55
Investigation of Thermal Fatigue Resistance of Different Hot Work Tool Steels in Aluminum Wheel Molds
Bora YayCMS Wheels & Makina San. Inc.
  • Bora Yay, Company
14:20
Thermo-mechanical fatigue testing of dual hardening tool steels
Matthias HofingerMontanuniversität Leoben
  • Ronald Schnitzer, Montanuniversität Leoben, Chair of Design of Steels
  • Kapp Marianne, voestalpine Böhler Edelstahl GmbH & Co KG
  • Harald Leitner, voestalpine Böhler Edelstahl GmbH & Co KG
  • Christoph Turk, voestalpine Böhler Edelstahl GmbH & Co KG
  • Miloslav Ognianov, voestalpine Böhler Edelstahl GmbH & Co KG
  • Benjamin Seisenbacher, Montanuniversität Leoben, Mechanical Engineering
14:45
Fracture toughness of a hot work tool steel fabricated by selective laser melting
Massimo PellizzariUniversity of Trento

Processing 1 - Machining

15:45
Effects of different electrical discharge machining strategies on the high cycle fatigue of plastic injection mold steel
Marcel OlivierWerkzeugmaschinenlabor der RWTH Aachen
  • Thomas Bergs, Laboratory for Machine Tools and Production Engineering WZL of RWTH Aachen University
  • Tim Herrig, Laboratory for Machine Tools and Production Engineering WZL of RWTH Aachen University
  • Andreas Klink, Laboratory for Machine Tools and Production Engineering WZL of RWTH Aachen University
  • Fritz Klocke, Laboratory for Machine Tools and Production Engineering WZL of RWTH Aachen University
16:10
Optimization of the temperature field for laser hardening of cold-work tool steel
Kristian ArntzFraunhofer-Institut für Produktionstechnologie
16:35
Micromachining of hardened high speed steel
Alexander MeijerTechnische Universität Dortmund

Room B

Properties 4 - Cold Work Steel and HSS

08:30
Mapping of galling initiation and wear mechanisms at reciprocal sliding of new PM tool steels against high performance steel sheets
Abdulbaset MussaKarlstad University
  • Pavel Krakhmalev, Karlstad University
  • Jens Bergström, Karlstad University
  • Anna Medvedeva, Uddeholms AB
  • Aydin Selte, Uddeholms AB
08:55
Tribological behaviour of cold work tool steels containing 12% and 8% chromium
Alfred Hacklvoestalpine BÖHLER Edelstahl GmbH & Co KG
09:20
Cobalt and retained austenite in high speed steels
Harald Leitnervoestalpine BÖHLER Edelstahl GmbH & Co KG
09:45
The influence of local cyclic plastic deformation on the residual stress evolution of an uncoated and TiN coated HS 6-5-2-5
Matthias GsellmannMaterials Center Leoben Forschung GmbH
  • Ingrid Schemmel, Voestalpine Böhler Edelstahl GmbH & Co KG
  • Harald Leitner, Voestalpine Böhler Edelstahl GmbH & Co KG
  • Stefan Marsoner, Materials Center Leoben Forschung GmbH
  • Gerald Ressel, Materials Center Leoben Forschung GmbH

Properties 5

10:45
Influence of hot hardness and microstructure of high-alloyed PM tool steels on abrasive wear behaviour at elevated temperatures
Nils WulbieterRuhr-Universität Bochum
  • Werner Theisen, Ruhr-Universität Bochum / Chair of Materials Technology
  • Kevin Czoske, Ruhr-Universität Bochum / Chair of Materials Technology
  • Simon Walbaum, Ruhr-Universität Bochum / Chair of Materials Technology
11:10
Laser-based tensioning of circular saw blades
Sven LangbeinForschungsgemeinschaft Werkzeuge und Werkstoffe e. V.
  • Ralph Keßler, FGW e.V.
  • Rabi Lahdo, Laser Zentrum Hannover e.V.
  • Christian Hennigs , Laser Zentrum Hannover e.V.
  • Sarah Nothdurft, Laser Zentrum Hannover e.V.
  • Michael Hustedt, Laser Zentrum Hannover e.V.
  • Stefan Kaierle , Laser Zentrum Hannover e.V.
11:35
Influence of dissipation on abrasive wear of a powder metallurgical mold steel in plastics injection molding
Walter FriesenbichlerMontanuniversität Leoben
  • David Zidar, Montanuniversitaet Leoben
  • Timo Gebauer, SIGMA Engineering GmbH
  • Andreas Blutmager, Wittmann Battenfeld Group

Additive Manufacturing 4

13:30
Methodology for Integration of Additive Manufacturing in Tool Manufacturing Process Chains
Moritz WollbrinkFraunhofer-Institut für Produktionstechnologie
  • Kristian Arntz, Fraunhofer Institute for Production Technology IPT
  • Thomas Bergs, Fraunhofer Institute for Production Technology IPT
13:55
Feasibility study of manufacturing several tool steels by Selective Laser Melting
Svenja RichertDeutsche Edelstahlwerke Specialty Steel GmbH & Co. KG
  • Hans-Günter Krull, Deutsche Edelstahlwerke Specialty Steel GmbH & Co.KG
  • Horst Hill, Deutsche Edelstahlwerke Specialty Steel GmbH & Co.KG
  • Jasmin Saewe, Fraunhofer Institute for Laser Technology
  • Rui Joao Santos Batista, Fraunhofer Institute for Laser Technology
  • Sebastian Bremen, Fraunhofer Institute for Laser Technology
14:20
Combined AM-processes (r)evoluting the tooling world
Juergen Küppershausvoestalpine Edelstahl Deutschland GmbH
  • Alexander Taube, Voestalpine Edelstahl Deutschland GmbH
14:45
High-alloyed steel powders with increased nitrogen content for laser additive manufacturing
Alwin SchulzLeibniz-Institut für Werkstofforientierte Technologien
  • Frank Walther, Technische Universität Dortmund, Fachgebiet Werkstoffprüftechnik - WPT
  • Jochen Tenkamp, Technische Universität Dortmund, Fachgebiet Werkstoffprüftechnik - WPT
  • Felix Stern, Technische Universität Dortmund, Fachgebiet Werkstoffprüftechnik - WPT
  • Johannes Boes, Ruhr-Universität Bochum, Lehrstuhl Werkstofftechnik - LWT
  • Werner Theisen, Ruhr Universität Bochum, Lehrstuhl Werkstofftechnik - LWT
  • Arne Röttger, Ruhr Universität Bochum, Lehrstuhl Werkstofftechnik - LWT
  • Karina Geenen, Ruhr Universität Bochum, Lehrstuhl Werkstofftechnik - LWT
  • Volker Uhlenwinkel, Leibniz-Institut für Werkstofforientierte Technologien - IWT Bremen (IWT)
  • Hans-Werner Zoch, Leibniz-Institut für Werkstofforientierte Technologien - IWT Bremen (IWT)

Manufacturing of Tool Steels

15:45
Manufacturing of as-cast ingots made for tool steel applications
Tobias DubbersteinSchmiedewerke Gröditz GMH Gruppe
  • Tobias Dubberstein, Schmiedewerke Gröditz GmbH
  • Alexander Kovalev, Schmiedewerke Gröditz GmbH
  • Michael Richter, Schmiedewerke Gröditz GmbH
16:10
Challenges and solution approaches for the processing of a cold work tool steel by means of Selective Laser Melting
Christian MutkeDörrenberg Edelstahl GmbH
  • Christoph Escher, Dörrenberg Edelstahl GmbH
16:35
Microstructure and properties of spray formed large section M35 high speed steel
Hongqing WuShanghai University
  • Ling Qiu, Shanghai University
  • mingda zheng, Shanghai University
  • Hongqing Wu, Shanghai University

Room A

Simulation and Modelling 1

08:30
Effect of cooling behavior on the microstructure evolution of C-ring specimen during deep cryogenic treatment
Xijuan HeShanghai University
  • Junwan Li, Shanghai University
  • Xijuan He, Shanghai University
08:55
Ingot casting simulation of high speed steel 1.3343
Felix NeukamDeutsche Edelstahlwerke Specialty Steel GmbH & Co. KG
  • Hans-Günter Krull, Deutsche Edelstahlwerke Specialty Steel GmbH & Co. KG
  • Adam Gießmann, Deutsche Edelstahlwerke Specialty Steel GmbH & Co. KG
09:20
Numerical Simulation of Tempering of the AISI H13
Valerian IssIWM
  • Valerian Iss, Institute for Materials Applications in Mechanical Engineering
  • Bengt Hallstedt, IAPK at RWTH Aachen University
  • Christoph Broeckmann, IAPK at RWTH Aachen University

Simulation and Modelling 2

10:45
Simulation of residual stresses after grinding of martensitic cold work tool steel
Ali RajaeiInstitute of Applied Powder Metallurgy and Ceramics at RWTH Aachen e. V.
  • Thomas Bergs, WZL of RWTH Aachen university
  • Daniel Trauth, WZL of RWTH Aachen University
  • Sebastian Barth, WZL of RWTH Aachen University
  • Christoph Broeckmann, IAPK at RWTH Aachen University
  • Bengt Hallstedt, IAPK at RWTH Aachen University
11:10
Hot Isostatic Pressing with Integrated Heat Treatment: FE-Simulation of Cold Work Tool Steel D7
Carola BirkeInstitute of Applied Powder Metallurgy and Ceramics at RWTH Aachen e. V.
  • Yuanbin Deng, Institute for Materials Applications in Mechanical Engineering (IWM)
  • Ali Rajaei, Institute of Applied Powder Metallurgy and Ceramics at RWTH Aachen e.V. (IAPK)
  • Anke Kaletsch, Institute for Materials Applications in Mechanical Engineering (IWM)
  • Christoph Broeckmann, Institute for Materials Applications in Mechanical Engineering (IWM)IWM der RWTH

Processing 3 - Heat Treatment

13:30
Carbonitriding of forging dies to improve lifetime
Heinrich Klümper-WestkampLeibniz-Institut für Werkstofforientierte Technologien
  • Hans-Werner Zoch, Leibniz Insitute for Materials Engineering
  • Marian Georg Skalecki, Leibniz Insitute for Materials Engineering
  • Stefanie Hoja, Leibniz Insitute for Materials Engineering
13:55
Deep Cryogenic Treatment of X153CrMoV12 Cold-work Tool Steel
Serdal AcarLeibniz Universität Hannover
  • Serdal Acar, LUH Hannover Institut für Werkstoffkunde
  • Gregory Gerstein, LUH Hannover Institut für Werkstoffkunde
  • Florian Nürnberger, LUH Hannover Institut für Werkstoffkunde
  • Chengsong Cui, Leibniz-Institut für Werkstofforientierte Technologien
  • Alwin Schulz, Leibniz-Institut für Werkstofforientierte Technologien
  • Matthias Steinbacher, Leibniz-Institut für Werkstofforientierte Technologien
  • Martin Wunde, VDEh Betriebsforschungsinstitut GmbH
  • Jochen Kurzynski, VDEh Betriebsforschungsinstitut GmbH
14:20
Effect of the cooling conditions and Ni-additions on the phase transformation and secondary hardening behavior of an HSS-type alloy
Reinhold SchneiderUniversity of Applied Sciences Upper Austria
  • Michael Aigner, Eisenwerk Sulzau-Werfen R. & E. Weinberger AG
  • Armin Paar, Eisenwerk Sulzau-Werfen R. & E. Weinberger AG
  • Leonel Elizondo, Eisenwerk Sulzau-Werfen R. & E. Weinberger AG
  • Thomas Trickl, Eisenwerk Sulzau-Werfen R. & E. Weinberger AG
  • Simona Kresser, Univ. of Appl. Sciences Upper Austria
14:45
Microstructures, heat treatment and properties of boron alloyed tool steels
Jonathan LentzRuhr-Universität Bochum

Tools and Application 2

15:45
The development of market requirements for plastic mold steels on the example of the automotive industry
Alexander HengstSchmiedewerke Gröditz GMH Gruppe
  • Alexander Hengst, Schmiedewerke Gröditz GmbH
16:10
Experimental Abrasive Contact Analysis – Dynamic Forces Between Grinding Discs and Steel for common Angle Grinder Applications
Alexander DürkoppForschungsgemeinschaft Werkzeuge und Werkstoffe e.V. (FGW)
  • Matthias Dörr, Karlsruher Institut für Technologie (KIT)
  • Sebastian Zimprich, Karlsruher Institut für Technologie (KIT)
  • Tim Bruchmüller, Karlsruher Institut für Technologie (KIT)
  • Alexander Dürkopp, Forschungsgemeinschaft Werkzeuge und Werkstoffe e.V. (FGW)
  • Hans-Jürgen Gittel, Forschungsgemeinschaft Werkzeuge und Werkstoffe e.V. (FGW)
  • Christian Pelshenke , Forschungsgemeinschaft Werkzeuge und Werkstoffe e.V. (FGW)
  • Peter Dültgen , Forschungsgemeinschaft Werkzeuge und Werkstoffe e.V. (FGW)
16:35
Design of a Flashless Forging Die for a Single Pin Crankshaft Forging
Prashant DateIndian Institute of Technology Bombay
  • Sameer Bagalkotkar, Sansera Engineering Company
  • Prashant Patil, Sansera Engineering Company, Bangalore
  • A. R. Kumbhar, Automotive Research Association of India, Pune
  • Satyajeet Kulkarni, Automotive Research Association of India, Pune
  • Prashant Date, Indian Institute of Technology Bombay

Room B

Processing 2 - Coating

08:30
Innovative coating processes for high performance mold and die application
Pierre CollignonPD2i Europe GmbH
  • Pierre COLLIGNON, PD2i Europe GmbH
  • Rene Scheibe, PD2i Europe GmbH
08:55
Self-lubricating PVD coatings for dry cold massive forming
Dennis Christopher HoffmannRheinisch-Westfälische Technische Hochschule Aachen
  • Kirsten Bobzin, Surface Engineering Institute (IOT), RWTH Aachen University
  • Tobias Brögelmann, Surface Engineering Institute (IOT), RWTH Aachen University
  • Nathan Christopher Kruppe, Surface Engineering Institute (IOT), RWTH Aachen University
  • Fritz Klocke, Laboratory for Machine Tools and Production Engineering (WZL), RWTH Aachen University
  • Fritz Klocke, Laboratory for Machine Tools and Production Engineering (WZL), RWTH Aachen University
  • Thomas Bergs, Laboratory for Machine Tools and Production Engineering (WZL), RWTH Aachen University
  • Daniel Trauth, Laboratory for Machine Tools and Production Engineering (WZL), RWTH Aachen University
  • Robby Mannens, Laboratory for Machine Tools and Production Engineering (WZL), RWTH Aachen University
  • Rafael Hild, Germany
09:20
Metal Ion Etching Behavior of High-Speed Steels
Juliane KampichlerMaterials Center Leoben Forschung GmbH
  • Harald Leitner, voestalpine Böhler Edelstahl GmbH & CoKG
  • Stefan Marsoner, Materials Center Leoben Forschung GmbH (MCL)
  • Gerald Ressel, Materials Center Leoben Forschung GmbH (MCL)
  • Thomas Klünsner, Materials Center Leoben Forschung GmbH (MCL)
  • Juliane Kampichler, Materials Center Leoben Forschung GmbH (MCL)
09:45
STAMPDUR PLUS® - a modern tool steel concept for high requirement hot stamping applications
Duan WangBuderus Edelstahl GmbH
  • Mitja Schimek, voestalpine eifeler Lasertechnik GmbH
  • Eugenie Klöpfer, Buderus Edelstahl GmbH
  • Peter Vetter, Buderus Edelstahl GmbH

Testing

10:45
The Method for Evaluation of Heat Checking in Die Casting
Huilin DengDaido Steel Co., Ltd.
  • Masakatsu Tatsutani, Daido Steel Co., Ltd.
  • Masamichi Kawano, Daido Steel Co., Ltd.
11:10
Design of a roll test bench for investigating thermo-mechanical tool wear
Josef DomitnerTechnische Universität Graz
  • Thomas Stern, Graz University of Technology; Institute of Materials Science, Joining and Forming
  • Alexander Leitner, Graz University of Technology; Institute of Materials Science, Joining and Forming
  • Michael Aigner, Eisenwerk Sulzau-Werfen, R. & E. Weinberger AG (ESW)
  • Armin Paar, Eisenwerk Sulzau-Werfen, R. & E. Weinberger AG (ESW)
  • Thomas Trickl, Eisenwerk Sulzau-Werfen, R. & E. Weinberger AG (ESW)
  • Leonel Elizondo, Eisenwerk Sulzau-Werfen, R. & E. Weinberger AG (ESW)
  • Christof Sommitsch, Graz University of Technology; Institute of Materials Science, Joining and Forming
11:35
Quantitative Determination of Retained Austenite by X-Ray Diffraction: An Overview of Measurement Uncertainty
Wolfgang Schützenhöfervoestalpine BÖHLER Edelstahl GmbH & Co KG
  • Wolfgang Schützenhöfer, voestalpine BÖHLER Edelstahl GmbH & Co KG
  • Marek Kuchta, voestalpine BÖHLER Edelstahl GmbH & Co KG
  • Karin Brandner, University of Leoben
  • Thomas Hönigmann, Technical University Graz
  • Carlos Martinez, voestalpine BÖHLER Edelstahl GmbH & Co KG
12:00
Development of a test rig for simulation of surface damaging of hot work tool steels for die casting dies
Federico Simone GobberPolitecnico di Torino
  • Andrea Pisa, Argo s.r.l.
  • Mario Rosso, Politecnico di Torino
  • Daniele Ugues, Politecnico di Torino
  • Alessandro Bertè, Lafer s.p.a

Tools and Application 1

13:30
3D Metal Printing of Stamping Tools & Dies and Injection Molds
Nader AsnafiÖrebro University
  • Anton Alveflo, voestalpine High Performance Metals Sweden AB
  • Nader Asnafi, Örebro University
13:55
Efficient lay-out and process specific optimization of complex 3D tempering systems in pressure die cast and polymer injection molds
Goetz HartmannMAGMA Gießereitechnologie GmbH
14:20
variothermal mold heating by infrared radiation – an interaction between material and technology
Werner BerlinTechnische Universität Braunschweig
  • Klaus Dröder, Technische Universität Braunschweig, Institut für Werkzeugmaschinen und Fertigungstechnik
  • Jan Beuscher, Technische Universität Braunschweig, Institut für Werkzeugmaschinen und Fertigungstechnik
  • Markus Kühn, Technische Universität Braunschweig, Institut für Werkzeugmaschinen und Fertigungstechnik
  • Michael Demes, Technische Universität Braunschweig, Institut für Werkzeugmaschinen und Fertigungstechnik
  • Jan Beuscher, Technische Universität Braunschweig, Institut für Werkzeugmaschinen und Fertigungstechnik
  • Klaus Dröder, Technische Universität Braunschweig, Institut für Werkzeugmaschinen und Fertigungstechnik
14:45
Development of composite tool steels via successive spray forming and selective heat treatment
Chengsong CuiLeibniz-Institute for Materials Engineering IWT
  • C. Cui, Leibniz-Institut für Werkstofforientierte Technologien
  • D. Nadolski, Leibniz-Institut für Werkstofforientierte Technologien
  • A. Schulz, Leibniz-Institut für Werkstofforientierte Technologien

Tool Steel - Developments

15:45
A modification of Ostergren model for thermomechanical fatigue life prediction of die-casting die steel
Pengpeng ZuoShanghai University
  • Xiaochun Wu, Shanghai University
  • Chang Yong , Shanghai University
  • Mingda Zheng, Shanghai University
16:10
Profile cross rolling of high interstitial austenitic stainless steels for application in plastics extrusion
Erik ForkeFraunhofer-Institut für Werkzeugmaschinen und Umformtechnik
  • Philipp Niederhofer, Deutsche Edelstahlwerke Specialty Steel GmbH & Co. KG
  • Mirko Albrecht, TU Chemnitz, Professur Kunststoffe
  • André Hüllmann, TU Chemnitz, Professur Kunststoffe
  • Verena Kräusel, TU Chemnitz, Professur für Umformendes Formgeben und Fügen
  • Till Schneiders, Deutsche Edelstahlwerke Specialty Steel GmbH & Co. KG
  • Michael Gehde, TU Chemnitz, Professur Kunststoffe
16:35
Characterization of damaging mechanisms and evolution of surface stress state on a hot work tool steel subjected to cyclic immersion in molten aluminum alloy
Federico Simone GobberPolitecnico di Torino
  • Mario Rosso, Politecnico di Torino
  • Daniele Ugues, Politecnico di Torino
  • Luca Seralessandri, G.n.r. srl

May 13: Poster Presentation

Design of Extrusion die geometry for making sheets from a mixture of metal powder and polymer
Prashant Date
Indian Institute of Technology Bombay
  • Sergei Alexandrov, Ishlinskii Institute for Problems in Mechanics, Moscow
  • Devanand Doifode, Indian Institute of Technology Bombay
  • Prashant Date, Indian Institute of Technology Bombay
Effect of an axial magnetic field on microstructure and property of electroslag remelted GCr15 ingot
Chuxiong Sun
Shanghai University
  • Chuxiong Sun, Shanghai University
  • Yunbo Zhong, Shanghai University
  • Qiang Li, Shanghai University
  • Tianxiang Zheng, Shanghai University
  • Weili Ren, Shanghai University
  • Zhongming Ren, Shanghai University
Effect of carbon content on the continuous cooling transformation characteristics of Cr-Mo-V die steel
Xijuan He
Shanghai University
  • Le Zhang, Shanghai University
  • Hongqing Wu, Shanghai University
  • Ling Qiu, Shanghai University
Effect of heat treatment procedure on the corrosion resistance of 4Cr13 steel
Weidong Dang
Shanghai University
  • Le Zhang, Shanghai University
  • Yubin Wang, Shanghai University
  • Chuanjiang Lv, Shanghai University
Effect of magnetic field on carbide morphology and property of electroslag remelted Cr12MoV ingots
Qiang Li
Shanghai University
  • Yunbo Zhong, Shanghai University
  • Cuxiong Sun, Shanghai University
  • Tianxiang Zheng, Shanghai University
  • Weili Ren, Shanghai University
  • Zhongming Ren, Shanghai University
Effect of mechanical strain on microstructure of a novel hot work tool steel 4Cr5Mo2NiV
Pengpeng Zuo
Shanghai University
  • Yan Zeng, Shanghai University
  • Pengpeng Zuo, Shanghai University
  • Zhenqiang Zhu, Shanghai University
Effect of Ni and Co on continuous cooling transformation behavior and performance of 4Cr5Mo2V hot work die steel
Boya Wu
Shanghai University
  • Boya Wu, Shanghai University
  • Jie Ji, Shanghai University
Effect of tempering process on microstructure and properties of 2CrNiMoMnV plastic die steel
Xiaochun Wu
Shanghai University
  • Yubin Wang, Shanghai University
  • Le Zhang, Shanghai University
  • Xuan Chen, Shanghai University
Failure analysis of a crankshaft forging die
Weidong Dang
Shanghai University
  • Pengpeng Zuo, Shanghai University
  • Zhixiong Bai, Shanghai University
  • Weidong Dang, Shanghai University
Hybrid Wire- and Powder-based Laser Metal Deposition for Modification of Local Properties of H11 Dies
Mahesh Teli
Fraunhofer-Institut für Produktionstechnologie
  • Mahesh Teli, Fraunhofer Institute for Production Technology IPT
  • Fritz Klocke, WZL, RWTH Aachen University
  • Kristian Arntz, Fraunhofer Institute for Production Technology IPT
  • Kai Winands, Fraunhofer Institute for Production Technology IPT
  • Thomas Bergs, WZL, RWTH Aachen University
Influence of loading on oxidative wear behavior of SDH55 hot work die steel
Xiaochun Wu
Shanghai University
  • Yufeng Sun, Shanghai University
  • Qiang Sun, Shanghai University
  • Zhixiong Bai, Shanghai University
Interactions between tool and part requirements – from a product development point of view
Boel Wadman
Swerea IVF
It is possible to use stainless steel like a binder in hard metals?
Alessandra Santos
Universidade estadual do norte fluminense
  • Umbelino Gomes, UFRN
  • Marcello Filgueira, UENF
Study on microstructure evolution in large cross-section plastic die steel during multi-directional forging
Junwan Li
Shanghai University
  • Junwan Li, Shanghai University
  • Xiaoxiao Zhang , Shanghai University