Program

Room A

Additive Manufacturing 1 - Hot Work Steel

11:00
Thermal fatigue and soldering resistance of additively manufactured hot work tool steels
Mikael ÅsbergKarlstad University
  • Pavel Krakhmalev, Karlstad University
  • Christos Oikonomou, Uddeholms AB
  • Henrik Andersson, Uddeholms AB
11:25
Characterization of microstructure and mechanical properties of high strength 5% Cr martensitic hot work tool steel manufactured by Selective Laser Melting
Jochen GiedenbacherFH OÖ Forschungs- und Entwicklungs GmbH
  • Christof Sommitsch, Institute of Materials Science, Joining and Forming, Graz University of Technology
  • Miloslav Ognianov, voestalpine BÖHLER Edelstahl GmbH & Co KG
  • Aziz Huskic, University of Applied Sciences Upper Austria
11:50
Corrosion resistant maraging steel for AM-produced plastic mold inserts
Christoph Turkvoestalpine Böhler Edelstahl Gmbh & Co KG
  • Horst Zunko, voestalpine Böhler Edelstahl GmbH & Co KG
  • Christin Aumayr, voestalpine Böhler Edelstahl GmbH & Co KG
12:15
A complete solution in metal AM for tooling applications – a case study on plastic injection moulding
Christos OikonomouUddeholms AB
  • Johnny Sjöström, Uddeholms AB
  • Seshendra Karamchedu, Uddeholms AB

Steel Design 2 - Hot Work Steel

14:00
Characterization of a modified hot-working steel with increased wear resistance
Serdal AcarLUH Hannover Institut für Werkstoffkunde
  • Gregory Gerstein, Institute of Materials Science
  • Sebastian Herbst, Institute of Materials Science
  • Uwe Lorenz, Institute of Forming Technology and Machines
  • Irfan Yousaf Malik, Institute of Forming Technology and Machines
  • Kai Brunotte, Institute of Forming Technology and Machines
14:25
Development of an intelligent hot-working steel to increase the tool wear resistance
Uwe LorenzInstitute of Forming Technology and Machines
  • Bernd-Arno Behrens, Institute of Forming Technology and Machines
  • Serdal Acar, Institute of Materials Science
  • Gregory Gerstein, Institute of Materials Science
  • Florian Nürnberger , Institute of Materials Science
  • Jan Puppa, Institute of Forming Technology and Machines
14:50
New filler material for repair of high-performance steel tools by laser cladding
Josephine ZeisigLeibniz Institute for Solid State and Materials Research Dresden, Institute for Complex Materials
  • Alexander Fröhlich, Chemnitz University of Technology, Institute for Machine Tools and Production Processes, Professorship for Forming and Joining
  • Julia Hufenbach, Leibniz Institute for Solid State and Materials Research Dresden, Institute for Complex Materials, Department for Alloy Design and Processing
  • Nicola Schädlich, Leibniz Institute for Solid State and Materials Research Dresden, Institute for Complex Materials, Department for Alloy Design and Processing
  • Verena Kräusel, Chemnitz University of Technology, Institute for Machine Tools and Production Processes, Professorship for Forming and Joining
  • Uta Kühn, Leibniz Institute for Solid State and Materials Research Dresden, Institute for Complex Materials, Department for Alloy Design and Processing
15:15
A new precipitation hardening steel to improve the lifetime of close die forging tools
Johannes FuchsBGH Edelstahl Siegen GmbH
  • Frank Hippenstiel, BGH Edelstahl Siegen GmbH

Steel Design 3

16:15
Effect of V on the phase amounts and the constitution of MC carbides in Indefinite Chill alloys
Armin PaarEisenwerk Sulzau-Werfen, R. & E. Weinberger AG
  • Reinhold Schneider, FH-OÖ F&E GmbH
  • Christof Sommitsch, Graz University of Technology / Institute of Materials Science, Joining and Forming
  • Michael Aigner, Eisenwerk Sulzau-Werfen, R. & E. Weinberger AG
  • Thomas Trickl, Eisenwerk Sulzau-Werfen, R. & E. Weinberger AG
16:40
A NEW STEEL FOR PLASTIC MOULDS COMBINING CORROSION RESISTANCE, HIGH HARDNESS, HIGH DUCTILITY AND VERY GOOD POLISHABILITY
Magnus TidestenUddeholms AB
  • Anna Medvedeva, Uddeholms AB
  • Magnus Brännbacka, Uddeholms AB
17:05
Influence of microsegregations on local phase stabilities in martensitic stainless cast steel
Frederic van gen HassendBergische Universität Wuppertal
  • Sebastian Weber, Bergische Universität Wuppertal
17:30
Optimization of TiC Hard Particles Morphology in Metal Matrix Composites by Niobium Addition
Andreas MohrDeutsche Edelstahlwerke Specialty Steel GmbH & Co. KG
  • Werner Theisen, Ruhr-Universität Bochum
  • Arne Röttger, Ruhr-Universität Bochum
  • Horst Hill, Deutsche Edelstahlwerke Specialty Steel GmbH & Co. KG

Room B

Steel Design 1- Cold Work Steel and HSS

11:00
A Computational Approach to the Microstructural Design of High-Speed Steels
Gero EgelsRuhr-Universität Bochum, Lehrstuhl Werkstofftechnik
  • Werner Theisen, Lehrstuhl Werkstofftechnik, Ruhr-Universität Bochum
  • Sebastian Weber, Lehrstuhl für neue Fertigungstechnologien und Werkstoffe, Bergische Universität Wuppertal
  • Nils Wulbieter, Lehrstuhl Werkstofftechnik, Ruhr-Universität Bochum
11:25
Possibilities for Niobium Application in Tool Steels
Rafael MesquitaCBMM Consultant
11:50
Influence of Particle Size on the Thermodynamic Stability of TiC Particulates in a Heat-Treatable Steel
Josef PörnbacherMaterials Center Leoben Forschung GmbH
  • Gerald Ressel, Materials Center Leoben Forschung GmbH
  • Stefan Marsoner, Materials Center Leoben Forschung GmbH
  • Harald Leitner, voestalpine BÖHLER Edelstahl GmbH & Co KG
12:15
Effects of alloying elements in hardness modification during heat treatment of high speed steels
Ana BragaInstitute for Technological Research
  • Mario Boccalini Jr., Institute for Technological Research
  • Felipe Carvalho, Institute for Technological Research
  • Roberto Andrade, Institute for Technological Research

Additive Manufacturing 2 - Cold Work Steel and HSS

14:00
Additive Manufacturing of a cold work steel using Electron Beam Melting
Carlos BoteroMid Sweden University
  • Mikael Bäckström, Mid Sweden University
  • Lars-Erik Rännar, Mid Sweden University
  • Stefan Roos, Mid Sweden University
  • Andrey Koptyug, Mid Sweden University
  • Kenneth Åsvik, Uddeholms AB
  • Aydin Selte, Uddeholms AB
  • Markus Ramsperger, Arcam AB
  • Carlos Botero, Mid Sweden University
14:25
Processing of high carbon steels by Selective Electron Beam Melting (SEBM)”
Marie JurischFraunhofer IFAM
  • Thomas Wenz, Barradas Schweißtechnik GmbH
  • Silvia Vock, Fraunhofer IFAM
  • Bernd Kieback, Institute of Material Science, Technische Universität Dresden
  • Burghardt Klöden, Fraunhofer IFAM
  • Alexander Kirchner, Fraunhofer IFAM
  • Thomas Weißgärber, Fraunhofer IFAM
14:50
Processing of X65MoCrWV3-2 cold work tool steel by Selective Laser Melting
Johannes BoesRuhr-Universität Bochum, Lehrstuhl Werkstofftechnik
  • Arne Röttger, Ruhr-Universität Bochum, Lehrstuhl Werkstofftechnik
  • Werner Theisen, Ruhr-Universität Bochum, Lehrstuhl Werkstofftechnik
15:15
Mechanical Properties of High Speed Steel AISI M50 Produced by Laser Powder Bed Fusion
Johannes KunzInstitute of Applied Powder Metallurgy and Ceramics at RWTH Aachen e.V. (IAPK)
  • Christoph Broeckmann, Institute of Applied Powder Metallurgy and Ceramics at RWTH Aachen e.V. (IAPK)
  • Johannes Henrich Schleifenbaum, Fraunhofer Institute of Laser Technology (ILT) / RWTH Aachen University- Digital Additive Production (DAP)
  • Jasmin Saewe, Fraunhofer Institute of Laser Technology ILT, Aachen
  • Anke Kaletsch, Institute of Applied Powder Metallurgy and Ceramics at RWTH Aachen e.V. (IAPK)
  • Simone Herzog, Institute of Applied Powder Metallurgy and Ceramics at RWTH Aachen e.V. (IAPK)

Additive Manufacturing 3 - Hard Materials

16:15
Material and process development for additive manufacturing of cemented carbide tool shafts
Tim SchubertAalen University - Materials Research Institute
  • Gerhard Schneider, Aalen University - Materials Research Institute
  • Timo Bernthaler, Aalen University - Materials Research Institute
  • Dirk Sellmer, MAPAL Dr. Kress KG
  • Markus Merkel, Aalen University - Institute for Virtual Product Development
  • Harald Riegel, Aalen University - Laser Application Center
  • Thomas Rieger, Aalen University - Materials Research Institute
16:40
Additive Manufacturing of Hardmetal Based Tools
Christian BergerFraunhofer IKTS
  • Johannes Pötschke, Fraunhofer IKTS
  • Tassilo Moritz, Fraunhofer IKTS
17:05
Additive Manufacturing of Metal Matrix Composites
Philipp KlugeDeutsche Edelstahlwerke Specialty Steel GmbH & Co. KG
  • Andreas Mohr, Deutsche Edelstahlwerke Specialty Steel GmbH & Co. KG
  • Horst Hill, Deutsche Edelstahlwerke Specialty Steel GmbH & Co. KG
17:30
Laser based Additive Manufacturing of WC-Co with High Temperature Powder Bed Pre-Heating
Stephan GenilkeIWM der RWTH Aachen
  • Markus Benjamin Wilms, Fraunhofer Institute for Laser Technology (ILT)
  • Martin Seimann, , Laboratory for Machine Tools and Production Engineering (WZL)
  • Andreas Weisheit, Fraunhofer Institute for Laser Technology (ILT)
  • Sofia Fries, Institute for Materials Applications in Mechanical Engineering
  • Anke Kaletsch, Institute for Materials Applications in Mechanical Engineering
  • Thomas Bergs, Laboratory for Machine Tools and Production Engineering (WZL)
  • Christoph Broeckmann, Institute for Materials Applications in Mechanical Engineering

Room A

Properties 1 - Hot Work Steel

08:30
Heat checking patterns and their relation with oxidation on a tool steel containing second-phase particles
Ana BragaInstitute for Technological Research
  • Luiz Lima, Surface Phenomena Laboratory, University of Sao Paulo
  • Roberto Souza, Surface Phenomena Laboratory, University of Sao Paulo
  • Mario Boccalini Jr., Institute for Technological Research
08:55
A SUMMARY OF WHAT MATERIAL PROPERTIES ARE IMPORTANT IN HOT WORK TOOL STEEL FOR HIGH PRESSURE DIE CASTING
Johnny SjostromUddeholms AB
  • Anna Medvedeva, Uddeholms AB
09:20
Alloy modification of classical CrMoV tool steels for special applications
Frank HippenstielBGH Edelstahl Siegen GmbH
  • Johannes Fuchs, BGH Edelstahl Siegen GmbH
09:45
The influence of the lath morphology on the fracture toughness of AISI H11 tool steel austempered below MS
Jian FengTU Bergakademie Freiberg
  • Marc Wettlaufer, Centre of Materials Engineering, Heilbronn University

Properties 2 - Hot Work Steel

10:45
Properties and service life of the hot work tool steel Thermodur E 40 K Superclean for die casting applications
Till SchneidersDeutsche Edelstahlwerke Specialty Steel GmbH & Co. KG
  • Philipp Niederhofer, Deutsche Edelstahlwerke Specialty Steel GmbH & Co. KG
  • Markus Gürcan, Deutsche Edelstahlwerke Specialty Steel GmbH & Co. KG
11:10
Properties of tool steels for application in hot stamping
Philipp NiederhoferDeutsche Edelstahlwerke Specialty Steel GmbH & Co. KG
  • Marion Merklein, Institute of Manufacturing Technology, Friedrich-Alexander-Universität Erlangen-Nürnberg (FAU)
  • Patrik Schwingenschlögl, Institute of Manufacturing Technology, Friedrich-Alexander-Universität Erlangen-Nürnberg (FAU)
  • Kathrin Eger, Deutsche Edelstahlwerke Specialty Steel GmbH & Co. KG
11:35
Manufacturing of Container and Stem Forgings for the Extrusion Industry - Materials and Properties
Günter Zeilervoestalpine Böhler Edelstahl GmbH & Co KG
  • Volker Wieser, voestalpine Böhler Edelstahl GmbH & Co KG
12:00
Quench Embrittlement in Hot Work Tool Steels
Rafael MesquitaCBMM Consultant
  • Reinhold Schneider, Upper Austria University of Applied Science
  • Renato Logiudice, University Nove de Julho
  • João Henrique Storopoli, University Nove de Julho

Properties 3 - Hot Work Steel

13:30
Tribological analysis of tool steels tested against a high manganese TWIP steel
Nelson F. Garza-Montes-de-OcaUniversidad Autónoma de Nuevo León
  • Javier H. Ramírez-Ramírez, Universidad Autónoma de Nuevo León, Facultad de Ingeniería Mecánica y Eléctrica
  • Francisco A Pérez-González, Universidad Autónoma de Nuevo León, Facultad de Ingeniería Mecánica y Eléctrica
  • Mauro J Gaona-Martínez, Universidad Autónoma de Nuevo León, Facultad de Ingeniería Mecánica y Eléctrica
  • Rafael Colás, Universidad Autónoma de Nuevo León, Facultad de Ingeniería Mecánica y Eléctrica
13:55
Life time enhancement of forging dies with tailored diffusion treatments
Hanno PaschkeFraunhofer Inst. Schicht- und Oberflächentechnik IST
  • Martin Weber, Fraunhofer Institute for Surface Engineering and Thin Films
  • Markus Mejauschek, Fraunhofer Institute for Surface Engineering and Thin Films
  • Dominik Lenz, Institute for Tool Research and Materials
  • Kai Brunotte, Institute of Forming Technology and Machines
  • Martin Siegmund, Institute of Forming Technology and Machines
  • Lenny Lippold, Institute of Forming Technology and Machines
14:20
Investigation of Thermal Fatigue Resistance of Different Hot Work Tool Steels in Aluminum Wheel Molds
Bora YayCompany
  • Bora Yay, Company
14:45
Thermo-mechanical fatigue testing of dual hardening tool steels
Matthias HofingerMontanuniversität Leoben, Chair of Design of Steels
  • Ronald Schnitzer, Montanuniversität Leoben, Chair of Design of Steels
  • Kapp Marianne, voestalpine Böhler Edelstahl GmbH & Co KG
  • Harald Leitner, voestalpine Böhler Edelstahl GmbH & Co KG
  • Christoph Turk, voestalpine Böhler Edelstahl GmbH & Co KG
  • Miloslav Ognianov, voestalpine Böhler Edelstahl GmbH & Co KG

Processing 1 - Machining

15:45
Effects of different electrical discharge machining strategies on the high cycle fatigue of plastic injection mold steel
Marcel OlivieraLaboratory for Machine Tools and Production Engineering WZL of RWTH Aachen University
  • Thomas Bergs, Laboratory for Machine Tools and Production Engineering WZL of RWTH Aachen University
  • Tim Herrig, Laboratory for Machine Tools and Production Engineering WZL of RWTH Aachen University
  • Andreas Klink, Laboratory for Machine Tools and Production Engineering WZL of RWTH Aachen University
  • Fritz Klocke, Laboratory for Machine Tools and Production Engineering WZL of RWTH Aachen University
16:10
Experimental analysis of contemporary Sinking EDM performance for machining of large size cavities in cold work tool steels
Timm PetersenLaboratory for Machine Tools and Production Engineering WZL of RWTH Aachen University
  • Thomas Bergs, Laboratory for Machine Tools and Production Engineering WZL of RWTH Aachen University
  • Simon Harst, Laboratory for Machine Tools and Production Engineering WZL of RWTH Aachen University
  • Andreas Klink, Laboratory for Machine Tools and Production Engineering WZL of RWTH Aachen University
16:35
Comparison between traditional CNC milling and hard milling in the manufacture of a cavity of an automotive component die
Laurence MagalhaesAmazonas Federal University

Room B

Properties 4 - Cold Work Steel and HSS

08:30
Mapping of galling initiation and wear mechanisms at reciprocal sliding of new PM tool steels against high performance steel sheets
Abdulbaset MussaKarlstad University
  • Pavel Krakhmalev, Karlstad University
  • Jens Bergström, Karlstad University
  • Anna Medvedeva, Uddeholms AB
  • Aydin Selte, Uddeholms AB
08:55
Tribological behaviour of cold work tool steels containing 12% and 8% chromium
Alfred Hacklvoestalpine Böhler Edelstahl GmbH & Co KG
09:20
Cobalt and retained austenite in high speed steels
Harald Leitnervoestalpine Böhler Edelstahl GmbH & Co KG
09:45
The influence of TiN coating on the damage behavior of HS 6-5-2-5 under local cyclic plastic deformation
Matthias GsellmannMaterials Center Leoben Forschung GmbH
  • Ingrid Schemmel, Voestalpine Böhler Edelstahl GmbH & Co KG
  • Harald Leitner, Voestalpine Böhler Edelstahl GmbH & Co KG
  • Stefan Marsoner, Materials Center Leoben Forschung GmbH
  • Gerald Ressel, Materials Center Leoben Forschung GmbH

Properties 5

10:45
Influence of hot hardness and microstructure of high-alloyed PM tool steels on abrasive wear behaviour at elevated temperatures
Nils WulbieterRuhr-Universität Bochum / Chair of Materials Technology
  • Werner Theisen, Ruhr-Universität Bochum / Chair of Materials Technology
  • Kevin Czoske, Ruhr-Universität Bochum / Chair of Materials Technology
  • Simon Walbaum, Ruhr-Universität Bochum / Chair of Materials Technology
11:10
Laser-based tensioning of circular saw blades
Sven LangbeinFGW e.V.
  • Ralph Keßler, FGW e.V.
11:35
Influence of dissipation on abrasive wear of a powder metallurgical mold steel in plastics injection molding
Walter FriesenbichlerMontanuniversitaet Leoben
  • David Zidar, Montanuniversitaet Leoben
  • Timo Gebauer, SIGMA Engineering GmbH
  • Andreas Blutmager, Wittmann Battenfeld Group
12:00
Impact fatigue testing of tool steels
Jens BergströmKarlstad University
  • Reza Karimi Bakhshandi, Karlstad University
  • Anders Gåård, Karlstad University

Additive Manufacturing 4

13:30
Methodology for Integration of Additive Manufacturing in Tool Manufacturing Process Chains
Moritz WollbrinkFraunhofer Institute for Production Technology IPT
  • Kristian Arntz, Fraunhofer Institute for Production Technology IPT
  • Thomas Bergs, Fraunhofer Institute for Production Technology IPT
13:55
Feasibility study of manufacturing several tool steels by Selective Laser Melting
Svenja RichertDeutsche Edelstahlwerke Specialty Steel GmbH&Co.KG
  • Hans-Günter Krull, Deutsche Edelstahlwerke Specialty Steel GmbH & Co.KG
  • Horst Hill, Deutsche Edelstahlwerke Specialty Steel GmbH & Co.KG
  • Jasmin Saewe, Fraunhofer Institute for Laser Technology
  • Rui Joao Santos Batista, Fraunhofer Institute for Laser Technology
  • Sebastian Bremen, Fraunhofer Institute for Laser Technology
14:20
Combined AM-processes (r)evoluting the tooling world
Juergen KueppershausVoestalpine Edelstahl Deutschland GmbH
  • Alexander Taube, Voestalpine Edelstahl Deutschland GmbH
14:45
High-alloyed steel powders with increased nitrogen content for laser additive manufacturing
Alwin SchulzLeibniz-Institut für Werkstofforientierte Technologien - IWT
  • Frank Walther, Technische Universität Dortmund, Fachgebiet Werkstoffprüftechnik - WPT
  • Jochen Tenkamp, Technische Universität Dortmund, Fachgebiet Werkstoffprüftechnik - WPT
  • Felix Frömel, Technische Universität Dortmund, Fachgebiet Werkstoffprüftechnik - WPT
  • Johannes Boes, Ruhr-Universität Bochum, Lehrstuhl Werkstofftechnik - LWT
  • Werner Theisen, Ruhr Universität Bochum, Lehrstuhl Werkstofftechnik - LWT
  • Arne Röttger, Ruhr Universität Bochum, Lehrstuhl Werkstofftechnik - LWT
  • Karina Geenen, Ruhr Universität Bochum, Lehrstuhl Werkstofftechnik - LWT
  • Volker Uhlenwinkel, Leibniz-Institut für Werkstofforientierte Technologien - IWT Bremen (IWT)
  • Hans-Werner Zoch, Leibniz-Institut für Werkstofforientierte Technologien - IWT Bremen (IWT)

Manufacturing of Tool Steels

15:45
Manufacturing of as-cast ingots made for tool steel applications
Tobias DubbersteinSchmiedewerke Gröditz GmbH
  • Tobias Dubberstein, Schmiedewerke Gröditz GmbH
  • Alexander Kovalev, Schmiedewerke Gröditz GmbH
  • Michael Richter, Schmiedewerke Gröditz GmbH
16:10
Challenges and solution approaches for the processing of a cold work tool steel by means of Selective Laser Melting
Christian MutkeDörrenberg Edelstahl GmbH
16:35
Microstructure and properties of spray formed large section M35 high speed steel
Xiaochun WuShanghai University
  • Ling Qiu, Shanghai University
  • mingda zheng, Shanghai University
  • Hongqing Wu, Shanghai University

Room A

Simulation and Modelling 1

08:30
Effect of cooling behavior on the microstructure evolution of C-ring specimen during deep cryogenic treatment
Xiaochun WuShanghai University
  • Junwan Li, Shanghai University
  • Xijuan He, Shanghai University
08:55
Steel casting simulation with OpenFOAM and MagmaSoft
Felix NeukamDeutsche Edelstahlwerke Specialty Steel GmbH & Co. KG
  • Hans-Günter Krull, Deutsche Edelstahlwerke Specialty Steel GmbH & Co. KG
  • Adam Gießmann, Deutsche Edelstahlwerke Specialty Steel GmbH & Co. KG
09:20
PROCESS CHAIN MODELLING OF METAL ADDITIVE MANUFACTURING FOR INJECTION MOULDING MOULD COMPONENTS
David De BaereTechnical University of Denmark
  • Mandaná Moshiri, Technical University of Denmark
  • Sankhya Mohanty, Technical University of Denmark
  • Guido Tosello, Technical University of Denmark
  • Jesper Hattel, Technical University of Denmark
09:45
Numerical Simulation of Tempering of the AISI H13
Ali RajaeiIAPK at RWTH Aachen University
  • Christoph Broeckmann, IAPK at RWTH Aachen University
  • Bengt Hallstedt, IAPK at RWTH Aachen University

Simulation and Modelling 2

10:45
Simulation of residual stresses after grinding of martensitic cold work tool steel
Ali RajaeiIAPK at RWTH Aachen University
  • Thomas Bergs, WZL of RWTH Aachen university
  • Daniel Trauth, WZL of RWTH Aachen University
  • Sebastian Barth, WZL of RWTH Aachen University
  • Christoph Broeckmann, IAPK at RWTH Aachen University
  • Bengt Hallstedt, IAPK at RWTH Aachen University
11:10
Multiscale analysis the microstructure and stress evolution during deep cryogenic treatment
Xiaochun WuShanghai University
  • Xin Cai, Shanghai University
  • Junwan Li, Shanghai University
11:35
A combined martensite/bainite phasefield model for the description of austenite transformation during heat treatment of tool steels
Adam GießmannDeutsche Edelstahlwerke Specialty Steel GmbH & Co. KG
  • Till Schneiders, Deutsche Edelstahlwerke Specialty Steel GmbH & Co. KG
  • Hans-Günter Krull, Deutsche Edelstahlwerke Specialty Steel GmbH & Co. KG
12:00
Hot Isostatic Pressing with Integrated Heat Treatment: FE-Simulation of Cold Work Tool Steel D7
Carola BirkeInstitute of Applied Powder Metallurgy and Ceramics at RWTH Aachen e.V.
  • Yuanbin Deng, Institute for Materials Applications in Mechanical Engineering (IWM)
  • Ali Rajaei, Institute of Applied Powder Metallurgy and Ceramics at RWTH Aachen e.V. (IAPK)
  • Anke Kaletsch, Institute for Materials Applications in Mechanical Engineering (IWM)
  • Christoph Broeckmann, Institute for Materials Applications in Mechanical Engineering (IWM)IWM der RWTH

Processing 3 - Heat Treatment

13:30
Carbonitriding of forging dies to improve lifetime
Heinrich Klümper-WestkampLeibniz Institute for Materials Engineering
  • Hans-Werner Zoch, Leibniz Insitute for Materials Engineering
  • Marian Georg Skalecki, Leibniz Insitute for Materials Engineering
  • Stefanie Hoja, Leibniz Insitute for Materials Engineering
13:55
Deep Cryogenic Treatment of X153CrMoV12 Cold-work Tool Steel
Serdal AcarLUH Hannover Institut für Werkstoffkunde
  • Serdal Acar, LUH Hannover Institut für Werkstoffkunde
  • Gregory Gerstein, LUH Hannover Institut für Werkstoffkunde
  • Florian Nürnberger, LUH Hannover Institut für Werkstoffkunde
  • Chengsong Cui, Leibniz-Institut für Werkstofforientierte Technologien (IWT)
  • Alwin Schulz, Leibniz-Institut für Werkstofforientierte Technologien (IWT)
  • Matthias Steinbacher, Leibniz-Institut für Werkstofforientierte Technologien (IWT)
  • Martin Wunde, VDEh Betriebsforschungsinstitut GmbH
  • Jochen Kurzynski, VDEh Betriebsforschungsinstitut GmbH
14:20
Effect of the cooling conditions and Ni-additions on the phase transformation and secondary hardening behavior of an HSS-type alloy
Reinhold SchneiderUniv. of Appl. Sciences Upper Austria
  • Michael Aigner, Eisenwerk Sulzau-Werfen R. & E. Weinberger AG
  • Armin Paar, Eisenwerk Sulzau-Werfen R. & E. Weinberger AG
  • Leonel Elizondo, Eisenwerk Sulzau-Werfen R. & E. Weinberger AG
  • Thomas Trickl, Eisenwerk Sulzau-Werfen R. & E. Weinberger AG
  • Simona Kresser, Univ. of Appl. Sciences Upper Austria
14:45
Effects of HIP-heat treatments on microstructure and properties of tool steels
Giulio MaistroUddeholms AB
  • Anna Medvedeva, Uddeholms AB
  • Staffan Gunnarsson, Uddeholms AB

Tools and Application 2

15:45
The development of market requirements for plastic mold steels on the example of the automotive industry
Carsten WolfSchmiedewerke Gröditz GmbH
  • Alexander Hengst, Schmiedewerke Gröditz GmbH
16:10
VIRUTAL DIE SPOTTING: COMPENSATION OF ELASTIC BEHAVIOUR OF FORMING PRESSES
Fabian ZgollVolkswagen AG
  • Wolfram Volk, Chair of Metal Forming and Casting (utg)
  • Tobias Goetze, Volkswagen AG
  • Srinath Kuruva, Volkswagen AG
16:35
Experimental Abrasive Contact Analysis – Dynamic Forces Between Grinding Discs and Steel for common Angle Grinder Applications
Sven MatthiesenKarlsruher Institut für Technologie (KIT)
  • Matthias Dörr, Karlsruher Institut für Technologie (KIT)
  • Sebastian Zimprich, Karlsruher Institut für Technologie (KIT)
  • Tim Bruchmüller, Karlsruher Institut für Technologie (KIT)
  • Alexander Dürkopp, Forschungsgemeinschaft Werkzeuge und Werkstoffe e.V. (FGW)
  • Hans-Jürgen Gittel, Forschungsgemeinschaft Werkzeuge und Werkstoffe e.V. (FGW)
  • Christian Pelshenke , Forschungsgemeinschaft Werkzeuge und Werkstoffe e.V. (FGW)
  • Peter Dültgen , Forschungsgemeinschaft Werkzeuge und Werkstoffe e.V. (FGW)

Room B

Processing 2 - Coating

08:30
Coating process for high performance molds and dies
PIERRE COLLIGNONPD2i Europe GmbH
  • Pierre COLLIGNON, PD2i Europe GmbH
  • Rene Scheibe, PD2i Europe GmbH
08:55
Self-lubricating PVD-coatings for dry cold massive forming
Dennis Christopher HoffmannSurface Engineering Institute (IOT), RWTH Aachen University
  • Kirsten Bobzin, Surface Engineering Institute (IOT), RWTH Aachen University
  • Tobias Brögelmann, Surface Engineering Institute (IOT), RWTH Aachen University
  • Nathan Christopher Kruppe, Surface Engineering Institute (IOT), RWTH Aachen University
  • Fritz Klocke, Laboratory for Machine Tools and Production Engineering (WZL), RWTH Aachen University
  • Fritz Klocke, Laboratory for Machine Tools and Production Engineering (WZL), RWTH Aachen University
  • Thomas Bergs, Laboratory for Machine Tools and Production Engineering (WZL), RWTH Aachen University
  • Daniel Trauth, Laboratory for Machine Tools and Production Engineering (WZL), RWTH Aachen University
  • Robby Mannens, Laboratory for Machine Tools and Production Engineering (WZL), RWTH Aachen University
  • Rafael Hild, Germany
09:20
Metal Ion Etching Behavior of High-Speed Steels
Juliane KampichlerMaterials Center Leoben Forschungs GmbH
  • Harald Leitner, voestalpine Böhler Edelstahl GmbH & CoKG
  • Stefan Marsoner, Materials Center Leoben Forschung GmbH (MCL)
  • Gerald Ressel, Materials Center Leoben Forschung GmbH (MCL)
  • Thomas Klünsner, Materials Center Leoben Forschung GmbH (MCL)
  • Juliane Kampichler, Materials Center Leoben Forschung GmbH (MCL)
09:45
STAMPDUR PLUS® - a modern tool steel concept for high requirement hot stamping applications
Duan WangBuderus Edelstahl GmbH
  • Mitja Schimek, voestalpine eifeler Lasertechnik GmbH
  • Eugenie Klöpfer, Buderus Edelstahl GmbH
  • Peter Vetter, Buderus Edelstahl GmbH

Testing

10:45
The Method for Evaluation of Heat Checking in Die Casting
HUILIN DENGDaido Steel Co., Ltd.
  • Masakatsu Tatsutani, Daido Steel Co., Ltd.
  • Masamichi Kawano, Daido Steel Co., Ltd.
11:10
Design of a roll test bench for investigating thermo-mechanical tool wear
Josef DomitnerGraz University of Technology
  • Thomas Stern, Graz University of Technology; Institute of Materials Science, Joining and Forming
  • Alexander Leitner, Graz University of Technology; Institute of Materials Science, Joining and Forming
  • Michael Aigner, Eisenwerk Sulzau-Werfen, R. & E. Weinberger AG (ESW)
  • Armin Paar, Eisenwerk Sulzau-Werfen, R. & E. Weinberger AG (ESW)
  • Thomas Trickl, Eisenwerk Sulzau-Werfen, R. & E. Weinberger AG (ESW)
  • Leonel Elizondo, Eisenwerk Sulzau-Werfen, R. & E. Weinberger AG (ESW)
  • Christof Sommitsch, Graz University of Technology; Institute of Materials Science, Joining and Forming
11:35
Quantitative Determination of Retained Austenite by X-Ray Diffraction: An Overview of Measurement Uncertainty
Wolfgang Schützenhöfervoestalpine BÖHLER Edelstahl GmbH & Co KG
  • Wolfgang Schützenhöfer, voestalpine BÖHLER Edelstahl GmbH & Co KG
  • Marek Kuchta, voestalpine BÖHLER Edelstahl GmbH & Co KG
  • Karin Brandner, University of Leoben
  • Thomas Hönigmann, Technical University Graz
  • Carlos Martinez, voestalpine BÖHLER Edelstahl GmbH & Co KG
12:00
Development of a test rig for simulation of surface damaging of hot work tool steels for die casting dies
Federico Simone GobberPolitecnico di Torino
  • Andrea Pisa, Argo s.r.l.
  • Mario Rosso, Politecnico di Torino
  • Daniele Ugues, Politecnico di Torino
  • Alessandro Bertè, Lafer s.p.a

Tools and Application 1

13:30
3D Metal Printing of Stamping Tools & Dies and Injection Molds
Nader AsnafiÖrebro University
  • Anton Alveflo, voestalpine High Performance Metals Sweden AB
  • Nader Asnafi, Örebro University
13:55
Efficient lay-out and process specific optimization of complex 3D tempering systems in pressure die cast and polymer injection molds
Goetz HartmannMAGMA GmbH
14:20
variothermal mold heating by infrared radiation – an interaction between material and technology
Werner BerlinTechnische Universität Braunschweig
  • Klaus Dröder, Technische Universität Braunschweig, Institut für Werkzeugmaschinen und Fertigungstechnik
  • Jan Beuscher, Technische Universität Braunschweig, Institut für Werkzeugmaschinen und Fertigungstechnik
  • Markus Kühn, Technische Universität Braunschweig, Institut für Werkzeugmaschinen und Fertigungstechnik
14:45
Shot Sleeves for aluminum Die Casting - New Application for VEX
Jose BacalhauVillares Metals SA
  • Paulo Haddad, Villares Metals SA
  • Jörn Maubach, EschmannStahl GMbH
  • Uwe Feldhoff, EschmannStahl GMbH

Tool Steel - Developments

15:45
A modification of Ostergren model for thermomechanical fatigue life prediction of die-casting die steel
Pengpeng ZuoShanghai University
  • Xiaochun Wu, Shanghai University
  • Chang Yong , Shanghai University
  • Mingda Zheng, Shanghai University
16:10
Profile cross rolling of high interstitial austenitic stainless steels for application in plastics extrusion
Erik ForkeFraunhofer IWU
  • Michael Gehde, TU Chemnitz
  • Till Schneiders, Deutsche Edelstahlwerke Specialty Steel GmbH & Co. KG
  • Verena Kräusel, TU Chemnitz
  • André Hüllmann, TU Chemnitz
  • Mirko Albrecht, TU Chemnitz
  • Philipp Niederhofer, Deutsche Edelstahlwerke Specialty Steel GmbH & Co. KG
16:35
Characterization of damaging mechanisms and evolution of surface stress state on a hot work tool steel subjected to cyclic immersion in molten aluminum alloy
Federico Simone GobberPolitecnico di Torino
  • Mario Rosso, Politecnico di Torino
  • Daniele Ugues, Politecnico di Torino
  • Luca Seralessandri, G.n.r. srl

May 13: Poster Presentation

Advanced Tooling Technologies to enable Hot Sheet Metal Forming of High Strength Aluminium
Michael Machhammer
AP&T Sweden AB
Automatic macroetch testing with supervised learning
Felix Neukam
Deutsche Edelstahlwerke Specialty Steel GmbH & Co. KG
  • Linus Deike, Deutsche Edelstahlwerke Specialty Steel GmbH & Co. KG
Design of a Flashless Forging Die for a Single Pin Crankshaft Forging
PRASHANT DATE
IIT BOMBAY
  • Sameer Bagalkotkar, Sansera Engineering Company
  • Prashant Patil, Sansera Engineering Company, Bangalore
  • A. R. Kumbhar, Automotive Research Association of India, Pune
  • Satyajeet Kulkarni, Automotive Research Association of India, Pune
  • Prashant Date, Indian Institute of Technology Bombay
Design of Extrusion die geometry for making sheets from a mixture of metal powder and polymer
PRASHANT DATE
IIT BOMBAY
  • Sergei Alexandrov, Ishlinskii Institute for Problems in Mechanics, Moscow
  • Devanand Doifode, Indian Institute of Technology Bombay
  • Prashant Date, Indian Institute of Technology Bombay
Dissolution and Erosion Behavior of AISI H13 Shot Sleeve in High Pressure Die Casting Process
Hardik Vachhani
College of Engineering, Pune
Effect of an axial magnetic field on microstructure and property of electroslag remelted GCr15 ingot
Chuxiong Sun
Shanghai University
  • Chuxiong Sun, Shanghai University
  • Yunbo Zhong, Shanghai University
  • Qiang Li, Shanghai University
  • Tianxiang Zheng, Shanghai University
  • Weili Ren, Shanghai University
  • Zhongming Ren, Shanghai University
Effect of carbon content on the continuous cooling transformation characteristics of Cr-Mo-V die steel
Xiaochun Wu
Shanghai University
  • Le Zhang, Shanghai University
  • Hongqing Wu, Shanghai University
  • Ling Qiu, Shanghai University
Effect of heat treatment procedure on the corrosion resistance of 4Cr13 steel
Xiaochun Wu
Shanghai University
  • Le Zhang, Shanghai University
  • Yubin Wang, Shanghai University
  • Chuanjiang Lv, Shanghai University
Effect of magnetic field on carbide morphology and property of electroslag remelted Cr12MoV ingots
Qiang Li
Shanghai University
  • Yunbo Zhong, Shanghai University
  • Cuxiong Sun, Shanghai University
  • Tianxiang Zheng, Shanghai University
  • Weili Ren, Shanghai University
  • Zhongming Ren, Shanghai University
Effect of mechanical strain on microstructure of a novel hot work tool steel 4Cr5Mo2NiV
Xiaochun Wu
Shanghai University
  • Yan Zeng, Shanghai University
  • Pengpeng Zuo, Shanghai University
  • Zhenqiang Zhu, Shanghai University
Effect of Ni and Co on continuous cooling transformation behavior and performance of 4Cr5Mo2V hot work die steel
Xiaochun Wu
Shanghai University
  • Boya Wu, Shanghai University
  • Jie Ji, Shanghai University
Effect of tempering process on microstructure and properties of 2CrNiMoMnV plastic die steel
Xiaochun Wu
Shanghai University
  • Yubin Wang, Shanghai University
  • Le Zhang, Shanghai University
  • Xuan Chen, Shanghai University
Failure analysis of a crankshaft forging die
Xiaochun Wu
Shanghai University
  • Pengpeng Zuo, Shanghai University
  • Zhixiong Bai, Shanghai University
  • Weidong Dang, Shanghai University
Hybrid Wire- and Powder-based Laser Metal Deposition for Toughness Enhancement of H11 Hot-work Tool Steel
Mahesh Teli
Fraunhofer Institute for Production Technology IPT
  • Mahesh Teli, Fraunhofer Institute for Production Technology IPT
  • Fritz Klocke, WZL, RWTH Aachen University
  • Kristian Arntz, Fraunhofer Institute for Production Technology IPT
  • Kai Winands, Fraunhofer Institute for Production Technology IPT
  • Thomas Bergs, WZL, RWTH Aachen University
Influence of case hardening on the static properties of additively manufactured case hardening steel
Dennis Wawoczny
Bergische Universität Wuppertal
  • Markus Schneider, GKN Sinter Metals Engineering GmbH
  • Sebastian Weber, Bergische Universität Wuppertal / Lehrstuhl für Neue Fertigungstechnologien und Werkstoffe
Influence of loading on oxidative wear behavior of SDH55 hot work die steel
Xiaochun Wu
Shanghai University
  • Yufeng Sun, Shanghai University
  • Qiang Sun, Shanghai University
  • Zhixiong Bai, Shanghai University
Interactions between tool and part requirements – from a product development point of view
Boel Wadman
Swerea IVF
It is possible to use stainless steel like a binder in hard metals?
Alessandra Santos
UENF
  • Umbelino Gomes, UFRN
  • Marcello Filgueira, UENF
Non-destructive hardness / microstructure testing of heat-treated mass production tool parts by, with multiple frequency eddy current method
Arnold Horsch
Arnold Horsch e.K.
Novel high-performance steels for the development of cast tools
Nicola Schädlich
Leibniz-Institut für Festkörper- und Werkstoffforschung
  • Uta Kühn, Leibniz-Institut für Festkörper- und Werkstoffforschung
  • Kai-Uwe Baumgart, Leibniz-Institut für Festkörper- und Werkstoffforschung
  • Josephine Zeisig, Leibniz-Institut für Festkörper- und Werkstoffforschung
  • Julia Kristin Hufenbach, Leibniz-Institut für Festkörper- und Werkstoffforschung
Optimization of heat treatment procedure of a large cross-section 10Ni3MnCuAl plastic die steel
Xiaochun Wu
Shanghai University
  • Xuan Chen, Shanghai University
  • Le Zhang, Shanghai University
  • Yongqiang Han, Shanghai University
Processing a new CBN cutting tool material
Marcello FILGUEIRA
UNIVERSIDADE ESTADUAL DO NORTE FLUMINENSE
  • MARCELLO FILGUEIRA, UNIVERSIDADE ESTADUAL DO NORTE FLUMINENSE
  • Renan GUIMARÃES, UNIVERSIDADE ESTADUAL DO NORTE FLUMINENSE
  • Renan Barros, UNIVERSIDADE ESTADUAL DO NORTE FLUMINENSE
  • Michel Oliveira, Universidade Federal do Espírito Santo
PROCESSING PM DIAMOND BEADS
Marcello FILGUEIRA
UNIVERSIDADE ESTADUAL DO NORTE FLUMINENSE
  • MARCELLO FILGUEIRA, UNIVERSIDADE ESTADUAL DO NORTE FLUMINENSE
  • Renan GUIMARÃES, UNIVERSIDADE ESTADUAL DO NORTE FLUMINENSE
  • Cássio Carvalho, Instituto Federal do Espírito Santo
  • Valdenir Moreira Jr., UNIVERSIDADE ESTADUAL DO NORTE FLUMINENSE
Study on microstructure evolution in large cross-section plastic die steel during multi-directional forging
Xiaochun Wu
Shanghai University
  • Junwan Li, Shanghai University
  • Xiaoxiao Zhang , Shanghai University